e-mobility
Battery pack
Highly innovative and customized solutions
What We Offer
Battery development
Multiphysics design to maximize the efficiency of the battery pack and to optimize its use according to the specific application.
Battery testing
Safety, reliability and durability are fundamental requirements for the use of the battery pack.
Experimental testing plays a crucial role in the development phase.
BMS Hardware & Software
Battery Management System (BMS) entirely in house developed and customizable according to the needs of the application and of the customer.
Electrical, mechanical and thermal engineering.
Through a multiphysics approach, based on the specifications imposed by the customer (energy and power, encumbrances on board vehicle, operating temperatures), the electrical, mechanical and thermal design of the entire battery pack is developed. Starting from the selection of the cells most suitable for the application (type: energy or power, chemistry: NMC, lifepo, LTO), the arrangement and choice of the below - components is aimed at maximizing the energy and power specific to the package. The optimization of performance is also guaranteed by the choice of the appropriate architectural package approach (Cell2module/module2pack - cell2pack). Each phase of the design is also supported by specific simulation software.
Our Products
A segment vehicle
Application
BeV
energy
31 kWh
continuous power
80 kW
peak power
120 kW
cell type
Prismatic
dimensions
1200x1000x230 mm
weight
360 kg
hypercar
Application
HeV
energy
5 kWh
continuous power
240 kW
peak power
375 kW
cell type
Pouch
dimensions
1490x210x400 mm
weight
105 kg
B segment vehicle
Application
BeV
energy
43 kWh
continuous power
90 kW
peak power
130 kW
cell type
Pouch
dimensions
1150x1000x180 mm
weight
355 kg
BMS: battery monitoring and management system
Thanks to the proprietary BMS developed by FLAG - MS, the characteristic parameters of the battery pack are properly controlled during its operation, while the algorithms of soc and soh allow an optimized use and aimed at increasing the useful life.
Support to the industrialization of the product
In order to validate experimentally the respect of every project requirement, the assembly and the tests are carried out in specialized laboratories. FLAG - MS supports the customer at all stages of product development, from prototyping to industrialization, directing design to aspects of Design for Manufacturing (DFM) and Design for Assembly (DFA) with the aim of creating battery packs suitable for any type of application.
Gallery
